Enum slint::Brush

#[non_exhaustive]
#[repr(C)]
pub enum Brush { SolidColor(Color), LinearGradient(LinearGradientBrush), RadialGradient(RadialGradientBrush), }
Expand description

A brush is a data structure that is used to describe how a shape, such as a rectangle, path or even text, shall be filled. A brush can also be applied to the outline of a shape, that means the fill of the outline itself.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

SolidColor(Color)

The color variant of brush is a plain color that is to be used for the fill.

§

LinearGradient(LinearGradientBrush)

The linear gradient variant of a brush describes the gradient stops for a fill where all color stops are along a line that’s rotated by the specified angle.

§

RadialGradient(RadialGradientBrush)

The radial gradient variant of a brush describes a circle variant centered in the middle

Implementations§

§

impl Brush

pub fn color(&self) -> Color

If the brush is SolidColor, the contained color is returned. If the brush is a LinearGradient, the color of the first stop is returned.

pub fn is_transparent(&self) -> bool

Returns true if this brush contains a fully transparent color (alpha value is zero)

assert!(Brush::default().is_transparent());
assert!(Brush::SolidColor(Color::from_argb_u8(0, 255, 128, 140)).is_transparent());
assert!(!Brush::SolidColor(Color::from_argb_u8(25, 128, 140, 210)).is_transparent());

pub fn is_opaque(&self) -> bool

Returns true if this brush is fully opaque

assert!(!Brush::default().is_opaque());
assert!(!Brush::SolidColor(Color::from_argb_u8(25, 255, 128, 140)).is_opaque());
assert!(Brush::SolidColor(Color::from_rgb_u8(128, 140, 210)).is_opaque());

pub fn brighter(&self, factor: f32) -> Brush

Returns a new version of this brush that has the brightness increased by the specified factor. This is done by calling Color::brighter on all the colors of this brush.

pub fn darker(&self, factor: f32) -> Brush

Returns a new version of this brush that has the brightness decreased by the specified factor. This is done by calling Color::darker on all the color of this brush.

pub fn transparentize(&self, amount: f32) -> Brush

Returns a new version of this brush with the opacity decreased by factor.

The transparency is obtained by multiplying the alpha channel by (1 - factor).

See also Color::transparentize

pub fn with_alpha(&self, alpha: f32) -> Brush

Returns a new version of this brush with the related color’s opacities set to alpha.

Trait Implementations§

§

impl Clone for Brush

§

fn clone(&self) -> Brush

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Debug for Brush

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Default for Brush

Construct a brush with transparent color

§

fn default() -> Brush

Returns the “default value” for a type. Read more
§

impl From<Color> for Brush

§

fn from(original: Color) -> Brush

Converts to this type from the input type.
§

impl From<LinearGradientBrush> for Brush

§

fn from(original: LinearGradientBrush) -> Brush

Converts to this type from the input type.
§

impl From<RadialGradientBrush> for Brush

§

fn from(original: RadialGradientBrush) -> Brush

Converts to this type from the input type.
§

impl InterpolatedPropertyValue for Brush

§

fn interpolate(&self, target_value: &Brush, t: f32) -> Brush

Returns the interpolated value between self and target_value according to the progress parameter t that’s usually between 0 and 1. With certain animation easing curves it may over- or undershoot though.
§

impl PartialEq for Brush

§

fn eq(&self, other: &Brush) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl StructuralPartialEq for Brush

Auto Trait Implementations§

§

impl RefUnwindSafe for Brush

§

impl Send for Brush

§

impl !Sync for Brush

§

impl Unpin for Brush

§

impl UnwindSafe for Brush

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> Downcast for Twhere T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> NoneValue for Twhere T: Default,

§

type NoneType = T

§

fn null_value() -> T

The none-equivalent value.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<R, P> ReadPrimitive<R> for Pwhere R: Read + ReadEndian<P>, P: Default,

source§

fn read_from_little_endian(read: &mut R) -> Result<Self, Error>

Read this value from the supplied reader. Same as ReadEndian::read_from_little_endian().
source§

fn read_from_big_endian(read: &mut R) -> Result<Self, Error>

Read this value from the supplied reader. Same as ReadEndian::read_from_big_endian().
source§

fn read_from_native_endian(read: &mut R) -> Result<Self, Error>

Read this value from the supplied reader. Same as ReadEndian::read_from_native_endian().
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more